What are the fusion splicer's classifications?

What are the fusion splicer's classifications?

Before splicing of the optical fiber fusion splicer, according to the material and type of the fiber, the key parameters such as the pre-melting main melting current and time and the fiber feeding amount are set. During the welding process, the “V” shaped groove, electrode, objective lens, welding chamber, etc. of the welding machine should be cleaned in time. Observe the presence or absence of bubbles, too thin, too thick, virtual fusion, separation, etc. in the welding. Pay attention to the tracking and monitoring of OTDR test instruments. As a result, the causes of the above-mentioned undesirable phenomena were analyzed in time, and corresponding improvement measures were taken.

To understand fusion splicer, first of all, to understand the classification of fusion splicer; then, for our use, to choose the corresponding type of fusion splicer. The most commonly used fusion splicer in our country is basically single-core fusion splicer (click for more details). The ribbon fusion splicer is mainly used for welding the ribbon cable. It can weld 8 cores and 12 cores at a time. The trunk transmission lines of general cities will use more. The polarization-maintaining fusion splicer is mainly used for polarization-maintaining special optical cables. Fusion splicers are mainly divided into three types: single-core, ribbon and polarization-maintaining fusion splicers.